refactoring

VPN/openvpn/readme.md

@@ -0,0 +1,6 @@
+# Setup OpenVPN
+
+OpenVPN is used for the connection between the home-server and the home network.
+
+It can be easily set up using [this link](https://pivpn.io/)
+

VPN/unify-vpn/login.sh

@@ -1,14 +0,0 @@
-#!/bin/bash
-
-echo "Connecting to VPN..."
-
-echo "c HOMESERVER" > /var/run/xl2tpd/l2tp-control
-
-sleep 10
-
-# To have all internet traffic routed through the VPN uncomment:
-#ip route add default dev ppp0
-
-# To only have a remote subnet routed through the VPN uncomment
-# (this line assumes the remote subnet you want routed is 192.168.0.0/24 and the remote VPN end is 10.11.0.1:
-ip route add 192.168.2.0/24 via <YOUR-IP-ADDRESS> dev ppp0 onlink

VPN/unify-vpn/logout.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-ip route del default dev ppp0
-ip route del 192.168.2.0/24 dev ppp0
-
-echo "d HOMESERVER" > /var/run/xl2tpd/l2tp-control
-service xl2tpd restart

VPN/unify-vpn/readme.md

@@ -1,111 +0,0 @@
-# VPN setup
-
-## Intro
-
-This is a manual to set up the Unify VPN server on an ubuntu machine. Note that this is quite difficult to set up, and I was not able to complete the set up on my VPN. This is why I still use a WireGuard VPN next to this one.
-
-The advantages of this VPN however are that Ubiquity has quite a nice app (android/iOS/windows) to connect to the local network. That is why the main use of this VPN will be to connect to the home network from the outside.
-
-## Installation on linux
-
-See [this github thread](https://gist.github.com/nahall/6b23603ce9df2500a4053b280071d1ad)
-
-- In Debian install the "xl2tpd" and "strongswan" packages.
-
-- Edit /etc/ipsec.conf to add the connection:
-
-    conn YOURVPNCONNECTIONNAME
-         authby=secret
-         pfs=no
-         auto=start
-         keyexchange=ikev1
-         keyingtries=3
-         dpddelay=15
-         dpdtimeout=45
-         dpdaction=clear
-         rekey=no
-         ikelifetime=3600
-         keylife=3600
-         type=transport
-         left=%defaultroute
-         leftprotoport=17/1701
-    # Replace IP address with your VPN server's IP
-         right=IPADDRESSOFVPNSERVER
-         rightprotoport=17/%any
-         ike=aes128-sha1-modp2048,aes256-sha1-modp4096,aes128-sha1-modp1536,aes256-sha1-modp2048,aes128-sha1-modp1024,aes256-sha1-modp1536,aes256-sha1-modp1024,3des-sha1-modp1024!
-         esp=aes128-sha1-modp2048,aes256-sha1-modp4096,aes128-sha1-modp1536,aes256-sha1-modp2048,aes128-sha1-modp1024,aes256-sha1-modp1536,aes256-sha1-modp1024!
-
-
-- Edit /etc/ipsec.secrets to add the secret key for this connection:
-
-    IPADDRESSOFVPNSERVER : PSK "SECRETPRESHAREDKEY"
-     
-
-- Edit /etc/xl2tpd/xl2tpd.conf to add this connection:
-
-    [lac YOURVPNCONNECTIONNAME]
-    lns = IPADDRESSOFVPNSERVER
-    ppp debug = yes
-    pppoptfile = /etc/ppp/options.l2tpd.client-YOURVPNCONNECTIONNAME
-    length bit = yes
-    
-    
-- Create the file /etc/ppp/options.l2tpd.client-YOURVPNCONNECTIONNAME:
-
-    ipcp-accept-local
-    ipcp-accept-remote
-    noccp
-    refuse-eap
-    refuse-chap
-    noauth
-    idle 1800
-    mtu 1410
-    mru 1410
-    defaultroute
-
-    # Uncomment if you want to use the DNS servers of the VPN host:
-    #usepeerdns
-
-    debug
-    logfile /var/log/xl2tpd.log
-    connect-delay 5000
-    proxyarp
-    name VPNUSERNAME
-    password "VPNPASSWORD"
-    
-    
-- Now to connect to the VPN create a script:
-
-    #!/bin/bash
-
-    echo "Connecting to VPN..."
-
-    echo "c YOURVPNCONNECTIONNAME" > /var/run/xl2tpd/l2tp-control
-
-    sleep 10
-
-    # To have all internet traffic routed through the VPN uncomment:
-    #ip route add default dev ppp0
-
-    # To only have a remote subnet routed through the VPN uncomment
-    # (this line assumes the remote subnet you want routed is 192.168.0.0/24 and the remote VPN end is 10.11.0.1:
-    ip route add 192.168.0.0/24 via 10.11.0.1 dev ppp0 uplink
-
-> Script above didn't work exacly. I had to add `onlink` at the end
-
-```bash
-/etc/init.d/ipsec restart
-/etc/init.d/xl2tpd restart
-```
-
-
-- And to disconnect to the VPN create a script:
-
-    #!/bin/bash
-
-    ip route del default dev ppp0
-    ip route del 192.168.0.0/24 dev ppp0
-
-    echo "d YOURVPNCONNECTIONNAME" > /var/run/xl2tpd/l2tp-control
-    service xl2tpd restart
-

VPN/wireguard-vpn/readme.md

@@ -1,5 +0,0 @@
-# WireGuard VPN
-
-## Intro
-
-This VPN is meant to connect the VPS with the home network. This folder also contains a docker-compose with a traefik setup. This traefik setup connects the home network with the VPS.

home-server/docker-compose.yml

@@ -1,11 +1,5 @@
 version: "3.9"
 services:
-  rabbitmq:
-    image: "registry.willemserruys.com/rabbitmq:latest"
-    ports:
-      - 10.55.8.3:1883:1883
-      - 10.55.8.3:15672:15672
-    restart: unless-stopped
   homeassistant:
     image: "ghcr.io/home-assistant/home-assistant:stable"
     ports:

rabbitmq/Dockerfile

@@ -1,2 +0,0 @@
-FROM rabbitmq:management
-RUN rabbitmq-plugins enable --offline rabbitmq_mqtt

rabbitmq/push.sh

@@ -1,2 +0,0 @@
-docker build -t registry.willemserruys.com/rabbitmq .
-docker push registry.willemserruys.com/rabbitmq:latest