Merge pull request #3 from wserr/improvements

Improvements

.env

@@ -1,4 +1,4 @@
-REPO_DIR=/home/pi/repos/homeAutomation
+REPO_DIR=/home/willem/repos/homeAutomation
 
 # Make sure docker user has read/write access on this folder
 STORAGE_DIR=/etc

.gitignore

@@ -4,3 +4,7 @@ production.env
 
 # Home assistant configuration file
 configuration-production.yaml
+
+node_modules/
+
+config/

dnsmasq.conf

@@ -0,0 +1,691 @@
+# Configuration file for dnsmasq.
+#
+# Format is one option per line, legal options are the same
+# as the long options legal on the command line. See
+# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
+
+# Listen on this specific port instead of the standard DNS port
+# (53). Setting this to zero completely disables DNS function,
+# leaving only DHCP and/or TFTP.
+#port=5353
+
+# The following two options make you a better netizen, since they
+# tell dnsmasq to filter out queries which the public DNS cannot
+# answer, and which load the servers (especially the root servers)
+# unnecessarily. If you have a dial-on-demand link they also stop
+# these requests from bringing up the link unnecessarily.
+
+# Never forward plain names (without a dot or domain part)
+domain-needed
+# Never forward addresses in the non-routed address spaces.
+bogus-priv
+
+# Uncomment these to enable DNSSEC validation and caching:
+# (Requires dnsmasq to be built with DNSSEC option.)
+#conf-file=%%PREFIX%%/share/dnsmasq/trust-anchors.conf
+#dnssec
+
+# Replies which are not DNSSEC signed may be legitimate, because the domain
+# is unsigned, or may be forgeries. Setting this option tells dnsmasq to
+# check that an unsigned reply is OK, by finding a secure proof that a DS 
+# record somewhere between the root and the domain does not exist. 
+# The cost of setting this is that even queries in unsigned domains will need
+# one or more extra DNS queries to verify.
+#dnssec-check-unsigned
+
+# Uncomment this to filter useless windows-originated DNS requests
+# which can trigger dial-on-demand links needlessly.
+# Note that (amongst other things) this blocks all SRV requests,
+# so don't use it if you use eg Kerberos, SIP, XMMP or Google-talk.
+# This option only affects forwarding, SRV records originating for
+# dnsmasq (via srv-host= lines) are not suppressed by it.
+#filterwin2k
+
+# Change this line if you want dns to get its upstream servers from
+# somewhere other that /etc/resolv.conf
+#resolv-file=
+
+# By  default,  dnsmasq  will  send queries to any of the upstream
+# servers it knows about and tries to favour servers to are  known
+# to  be  up.  Uncommenting this forces dnsmasq to try each query
+# with  each  server  strictly  in  the  order  they   appear   in
+# /etc/resolv.conf
+#strict-order
+
+# If you don't want dnsmasq to read /etc/resolv.conf or any other
+# file, getting its servers from this file instead (see below), then
+# uncomment this.
+no-resolv
+
+# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
+# files for changes and re-read them then uncomment this.
+#no-poll
+
+# Add other name servers here, with domain specs if they are for
+# non-public domains.
+server=8.8.8.8
+server=8.8.4.4
+
+
+# Example of routing PTR queries to nameservers: this will send all
+# address->name queries for 192.168.3/24 to nameserver 10.1.2.3
+#server=/3.168.192.in-addr.arpa/10.1.2.3
+
+# Add local-only domains here, queries in these domains are answered
+# from /etc/hosts or DHCP only.
+#local=/localnet/
+
+# Add domains which you want to force to an IP address here.
+# The example below send any host in double-click.net to a local
+# web-server.
+#address=/double-click.net/127.0.0.1
+
+# --address (and --server) work with IPv6 addresses too.
+#address=/www.thekelleys.org.uk/fe80::20d:60ff:fe36:f83
+
+# Add the IPs of all queries to yahoo.com, google.com, and their
+# subdomains to the vpn and search ipsets:
+#ipset=/yahoo.com/google.com/vpn,search
+
+# Add the IPs of all queries to yahoo.com, google.com, and their
+# subdomains to netfilters sets, which is equivalent to
+# 'nft add element ip test vpn { ... }; nft add element ip test search { ... }'
+#nftset=/yahoo.com/google.com/ip#test#vpn,ip#test#search
+
+# Use netfilters sets for both IPv4 and IPv6:
+# This adds all addresses in *.yahoo.com to vpn4 and vpn6 for IPv4 and IPv6 addresses.
+#nftset=/yahoo.com/4#ip#test#vpn4
+#nftset=/yahoo.com/6#ip#test#vpn6
+
+# You can control how dnsmasq talks to a server: this forces
+# queries to 10.1.2.3 to be routed via eth1
+# server=10.1.2.3@eth1
+
+# and this sets the source (ie local) address used to talk to
+# 10.1.2.3 to 192.168.1.1 port 55 (there must be an interface with that
+# IP on the machine, obviously).
+# server=10.1.2.3@192.168.1.1#55
+
+# If you want dnsmasq to change uid and gid to something other
+# than the default, edit the following lines.
+#user=
+#group=
+
+# If you want dnsmasq to listen for DHCP and DNS requests only on
+# specified interfaces (and the loopback) give the name of the
+# interface (eg eth0) here.
+# Repeat the line for more than one interface.
+#interface=
+# Or you can specify which interface _not_ to listen on
+#except-interface=
+# Or which to listen on by address (remember to include 127.0.0.1 if
+# you use this.)
+#listen-address=
+# If you want dnsmasq to provide only DNS service on an interface,
+# configure it as shown above, and then use the following line to
+# disable DHCP and TFTP on it.
+#no-dhcp-interface=
+
+# On systems which support it, dnsmasq binds the wildcard address,
+# even when it is listening on only some interfaces. It then discards
+# requests that it shouldn't reply to. This has the advantage of
+# working even when interfaces come and go and change address. If you
+# want dnsmasq to really bind only the interfaces it is listening on,
+# uncomment this option. About the only time you may need this is when
+# running another nameserver on the same machine.
+#bind-interfaces
+
+# If you don't want dnsmasq to read /etc/hosts, uncomment the
+# following line.
+#no-hosts
+# or if you want it to read another file, as well as /etc/hosts, use
+# this.
+#addn-hosts=/etc/banner_add_hosts
+
+# Set this (and domain: see below) if you want to have a domain
+# automatically added to simple names in a hosts-file.
+#expand-hosts
+
+# Set the domain for dnsmasq. this is optional, but if it is set, it
+# does the following things.
+# 1) Allows DHCP hosts to have fully qualified domain names, as long
+#     as the domain part matches this setting.
+# 2) Sets the "domain" DHCP option thereby potentially setting the
+#    domain of all systems configured by DHCP
+# 3) Provides the domain part for "expand-hosts"
+#domain=thekelleys.org.uk
+
+# Set a different domain for a particular subnet
+#domain=wireless.thekelleys.org.uk,192.168.2.0/24
+
+# Same idea, but range rather then subnet
+#domain=reserved.thekelleys.org.uk,192.68.3.100,192.168.3.200
+
+# Uncomment this to enable the integrated DHCP server, you need
+# to supply the range of addresses available for lease and optionally
+# a lease time. If you have more than one network, you will need to
+# repeat this for each network on which you want to supply DHCP
+# service.
+#dhcp-range=192.168.0.50,192.168.0.150,12h
+
+# This is an example of a DHCP range where the netmask is given. This
+# is needed for networks we reach the dnsmasq DHCP server via a relay
+# agent. If you don't know what a DHCP relay agent is, you probably
+# don't need to worry about this.
+#dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h
+
+# This is an example of a DHCP range which sets a tag, so that
+# some DHCP options may be set only for this network.
+#dhcp-range=set:red,192.168.0.50,192.168.0.150
+
+# Use this DHCP range only when the tag "green" is set.
+#dhcp-range=tag:green,192.168.0.50,192.168.0.150,12h
+
+# Specify a subnet which can't be used for dynamic address allocation,
+# is available for hosts with matching --dhcp-host lines. Note that
+# dhcp-host declarations will be ignored unless there is a dhcp-range
+# of some type for the subnet in question.
+# In this case the netmask is implied (it comes from the network
+# configuration on the machine running dnsmasq) it is possible to give
+# an explicit netmask instead.
+#dhcp-range=192.168.0.0,static
+
+# Enable DHCPv6. Note that the prefix-length does not need to be specified
+# and defaults to 64 if missing/
+#dhcp-range=1234::2, 1234::500, 64, 12h
+
+# Do Router Advertisements, BUT NOT DHCP for this subnet.
+#dhcp-range=1234::, ra-only 
+
+# Do Router Advertisements, BUT NOT DHCP for this subnet, also try and
+# add names to the DNS for the IPv6 address of SLAAC-configured dual-stack 
+# hosts. Use the DHCPv4 lease to derive the name, network segment and 
+# MAC address and assume that the host will also have an
+# IPv6 address calculated using the SLAAC algorithm.
+#dhcp-range=1234::, ra-names
+
+# Do Router Advertisements, BUT NOT DHCP for this subnet.
+# Set the lifetime to 46 hours. (Note: minimum lifetime is 2 hours.)
+#dhcp-range=1234::, ra-only, 48h
+
+# Do DHCP and Router Advertisements for this subnet. Set the A bit in the RA
+# so that clients can use SLAAC addresses as well as DHCP ones.
+#dhcp-range=1234::2, 1234::500, slaac
+
+# Do Router Advertisements and stateless DHCP for this subnet. Clients will
+# not get addresses from DHCP, but they will get other configuration information.
+# They will use SLAAC for addresses.
+#dhcp-range=1234::, ra-stateless
+
+# Do stateless DHCP, SLAAC, and generate DNS names for SLAAC addresses
+# from DHCPv4 leases.
+#dhcp-range=1234::, ra-stateless, ra-names
+
+# Do router advertisements for all subnets where we're doing DHCPv6
+# Unless overridden by ra-stateless, ra-names, et al, the router 
+# advertisements will have the M and O bits set, so that the clients
+# get addresses and configuration from DHCPv6, and the A bit reset, so the 
+# clients don't use SLAAC addresses.
+#enable-ra
+
+# Supply parameters for specified hosts using DHCP. There are lots
+# of valid alternatives, so we will give examples of each. Note that
+# IP addresses DO NOT have to be in the range given above, they just
+# need to be on the same network. The order of the parameters in these
+# do not matter, it's permissible to give name, address and MAC in any
+# order.
+
+# Always allocate the host with Ethernet address 11:22:33:44:55:66
+# The IP address 192.168.0.60
+#dhcp-host=11:22:33:44:55:66,192.168.0.60
+
+# Always set the name of the host with hardware address
+# 11:22:33:44:55:66 to be "fred"
+#dhcp-host=11:22:33:44:55:66,fred
+
+# Always give the host with Ethernet address 11:22:33:44:55:66
+# the name fred and IP address 192.168.0.60 and lease time 45 minutes
+#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m
+
+# Give a host with Ethernet address 11:22:33:44:55:66 or
+# 12:34:56:78:90:12 the IP address 192.168.0.60. Dnsmasq will assume
+# that these two Ethernet interfaces will never be in use at the same
+# time, and give the IP address to the second, even if it is already
+# in use by the first. Useful for laptops with wired and wireless
+# addresses.
+#dhcp-host=11:22:33:44:55:66,12:34:56:78:90:12,192.168.0.60
+
+# Give the machine which says its name is "bert" IP address
+# 192.168.0.70 and an infinite lease
+#dhcp-host=bert,192.168.0.70,infinite
+
+# Always give the host with client identifier 01:02:02:04
+# the IP address 192.168.0.60
+#dhcp-host=id:01:02:02:04,192.168.0.60
+
+# Always give the InfiniBand interface with hardware address
+# 80:00:00:48:fe:80:00:00:00:00:00:00:f4:52:14:03:00:28:05:81 the
+# ip address 192.168.0.61. The client id is derived from the prefix
+# ff:00:00:00:00:00:02:00:00:02:c9:00 and the last 8 pairs of
+# hex digits of the hardware address.
+#dhcp-host=id:ff:00:00:00:00:00:02:00:00:02:c9:00:f4:52:14:03:00:28:05:81,192.168.0.61
+
+# Always give the host with client identifier "marjorie"
+# the IP address 192.168.0.60
+#dhcp-host=id:marjorie,192.168.0.60
+
+# Enable the address given for "judge" in /etc/hosts
+# to be given to a machine presenting the name "judge" when
+# it asks for a DHCP lease.
+#dhcp-host=judge
+
+# Never offer DHCP service to a machine whose Ethernet
+# address is 11:22:33:44:55:66
+#dhcp-host=11:22:33:44:55:66,ignore
+
+# Ignore any client-id presented by the machine with Ethernet
+# address 11:22:33:44:55:66. This is useful to prevent a machine
+# being treated differently when running under different OS's or
+# between PXE boot and OS boot.
+#dhcp-host=11:22:33:44:55:66,id:*
+
+# Send extra options which are tagged as "red" to
+# the machine with Ethernet address 11:22:33:44:55:66
+#dhcp-host=11:22:33:44:55:66,set:red
+
+# Send extra options which are tagged as "red" to
+# any machine with Ethernet address starting 11:22:33:
+#dhcp-host=11:22:33:*:*:*,set:red
+
+# Give a fixed IPv6 address and name to client with 
+# DUID 00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2
+# Note the MAC addresses CANNOT be used to identify DHCPv6 clients.
+# Note also that the [] around the IPv6 address are obligatory.
+#dhcp-host=id:00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2, fred, [1234::5] 
+
+# Ignore any clients which are not specified in dhcp-host lines
+# or /etc/ethers. Equivalent to ISC "deny unknown-clients".
+# This relies on the special "known" tag which is set when
+# a host is matched.
+#dhcp-ignore=tag:!known
+
+# Send extra options which are tagged as "red" to any machine whose
+# DHCP vendorclass string includes the substring "Linux"
+#dhcp-vendorclass=set:red,Linux
+
+# Send extra options which are tagged as "red" to any machine one
+# of whose DHCP userclass strings includes the substring "accounts"
+#dhcp-userclass=set:red,accounts
+
+# Send extra options which are tagged as "red" to any machine whose
+# MAC address matches the pattern.
+#dhcp-mac=set:red,00:60:8C:*:*:*
+
+# If this line is uncommented, dnsmasq will read /etc/ethers and act
+# on the ethernet-address/IP pairs found there just as if they had
+# been given as --dhcp-host options. Useful if you keep
+# MAC-address/host mappings there for other purposes.
+#read-ethers
+
+# Send options to hosts which ask for a DHCP lease.
+# See RFC 2132 for details of available options.
+# Common options can be given to dnsmasq by name:
+# run "dnsmasq --help dhcp" to get a list.
+# Note that all the common settings, such as netmask and
+# broadcast address, DNS server and default route, are given
+# sane defaults by dnsmasq. You very likely will not need
+# any dhcp-options. If you use Windows clients and Samba, there
+# are some options which are recommended, they are detailed at the
+# end of this section.
+
+# Override the default route supplied by dnsmasq, which assumes the
+# router is the same machine as the one running dnsmasq.
+#dhcp-option=3,1.2.3.4
+
+# Do the same thing, but using the option name
+#dhcp-option=option:router,1.2.3.4
+
+# Override the default route supplied by dnsmasq and send no default
+# route at all. Note that this only works for the options sent by
+# default (1, 3, 6, 12, 28) the same line will send a zero-length option
+# for all other option numbers.
+#dhcp-option=3
+
+# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
+#dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5
+
+# Send DHCPv6 option. Note [] around IPv6 addresses.
+#dhcp-option=option6:dns-server,[1234::77],[1234::88]
+
+# Send DHCPv6 option for namservers as the machine running 
+# dnsmasq and another.
+#dhcp-option=option6:dns-server,[::],[1234::88]
+
+# Ask client to poll for option changes every six hours. (RFC4242)
+#dhcp-option=option6:information-refresh-time,6h
+
+# Set option 58 client renewal time (T1). Defaults to half of the
+# lease time if not specified. (RFC2132)
+#dhcp-option=option:T1,1m
+
+# Set option 59 rebinding time (T2). Defaults to 7/8 of the
+# lease time if not specified. (RFC2132)
+#dhcp-option=option:T2,2m
+
+# Set the NTP time server address to be the same machine as
+# is running dnsmasq
+#dhcp-option=42,0.0.0.0
+
+# Set the NIS domain name to "welly"
+#dhcp-option=40,welly
+
+# Set the default time-to-live to 50
+#dhcp-option=23,50
+
+# Set the "all subnets are local" flag
+#dhcp-option=27,1
+
+# Send the etherboot magic flag and then etherboot options (a string).
+#dhcp-option=128,e4:45:74:68:00:00
+#dhcp-option=129,NIC=eepro100
+
+# Specify an option which will only be sent to the "red" network
+# (see dhcp-range for the declaration of the "red" network)
+# Note that the tag: part must precede the option: part.
+#dhcp-option = tag:red, option:ntp-server, 192.168.1.1
+
+# The following DHCP options set up dnsmasq in the same way as is specified
+# for the ISC dhcpcd in
+# https://web.archive.org/web/20040313070105/http://us1.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
+# adapted for a typical dnsmasq installation where the host running
+# dnsmasq is also the host running samba.
+# you may want to uncomment some or all of them if you use
+# Windows clients and Samba.
+#dhcp-option=19,0           # option ip-forwarding off
+#dhcp-option=44,0.0.0.0     # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
+#dhcp-option=45,0.0.0.0     # netbios datagram distribution server
+#dhcp-option=46,8           # netbios node type
+
+# Send an empty WPAD option. This may be REQUIRED to get windows 7 to behave.
+#dhcp-option=252,"\n"
+
+# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client
+# probably doesn't support this......
+#dhcp-option=option:domain-search,eng.apple.com,marketing.apple.com
+
+# Send RFC-3442 classless static routes (note the netmask encoding)
+#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8
+
+# Send vendor-class specific options encapsulated in DHCP option 43.
+# The meaning of the options is defined by the vendor-class so
+# options are sent only when the client supplied vendor class
+# matches the class given here. (A substring match is OK, so "MSFT"
+# matches "MSFT" and "MSFT 5.0"). This example sets the
+# mtftp address to 0.0.0.0 for PXEClients.
+#dhcp-option=vendor:PXEClient,1,0.0.0.0
+
+# Send microsoft-specific option to tell windows to release the DHCP lease
+# when it shuts down. Note the "i" flag, to tell dnsmasq to send the
+# value as a four-byte integer - that's what microsoft wants. See
+# http://technet2.microsoft.com/WindowsServer/en/library/a70f1bb7-d2d4-49f0-96d6-4b7414ecfaae1033.mspx?mfr=true
+#dhcp-option=vendor:MSFT,2,1i
+
+# Send the Encapsulated-vendor-class ID needed by some configurations of
+# Etherboot to allow is to recognise the DHCP server.
+#dhcp-option=vendor:Etherboot,60,"Etherboot"
+
+# Send options to PXELinux. Note that we need to send the options even
+# though they don't appear in the parameter request list, so we need
+# to use dhcp-option-force here.
+# See http://syslinux.zytor.com/pxe.php#special for details.
+# Magic number - needed before anything else is recognised
+#dhcp-option-force=208,f1:00:74:7e
+# Configuration file name
+#dhcp-option-force=209,configs/common
+# Path prefix
+#dhcp-option-force=210,/tftpboot/pxelinux/files/
+# Reboot time. (Note 'i' to send 32-bit value)
+#dhcp-option-force=211,30i
+
+# Set the boot filename for netboot/PXE. You will only need
+# this if you want to boot machines over the network and you will need
+# a TFTP server; either dnsmasq's built-in TFTP server or an
+# external one. (See below for how to enable the TFTP server.)
+#dhcp-boot=pxelinux.0
+
+# The same as above, but use custom tftp-server instead machine running dnsmasq
+#dhcp-boot=pxelinux,server.name,192.168.1.100
+
+# Boot for iPXE. The idea is to send two different
+# filenames, the first loads iPXE, and the second tells iPXE what to
+# load. The dhcp-match sets the ipxe tag for requests from iPXE.
+#dhcp-boot=undionly.kpxe
+#dhcp-match=set:ipxe,175 # iPXE sends a 175 option.
+#dhcp-boot=tag:ipxe,http://boot.ipxe.org/demo/boot.php
+
+# Encapsulated options for iPXE. All the options are
+# encapsulated within option 175
+#dhcp-option=encap:175, 1, 5b         # priority code
+#dhcp-option=encap:175, 176, 1b       # no-proxydhcp
+#dhcp-option=encap:175, 177, string   # bus-id
+#dhcp-option=encap:175, 189, 1b       # BIOS drive code
+#dhcp-option=encap:175, 190, user     # iSCSI username
+#dhcp-option=encap:175, 191, pass     # iSCSI password
+
+# Test for the architecture of a netboot client. PXE clients are
+# supposed to send their architecture as option 93. (See RFC 4578)
+#dhcp-match=peecees, option:client-arch, 0 #x86-32
+#dhcp-match=itanics, option:client-arch, 2 #IA64
+#dhcp-match=hammers, option:client-arch, 6 #x86-64
+#dhcp-match=mactels, option:client-arch, 7 #EFI x86-64
+
+# Do real PXE, rather than just booting a single file, this is an
+# alternative to dhcp-boot.
+#pxe-prompt="What system shall I netboot?"
+# or with timeout before first available action is taken:
+#pxe-prompt="Press F8 for menu.", 60
+
+# Available boot services. for PXE.
+#pxe-service=x86PC, "Boot from local disk"
+
+# Loads <tftp-root>/pxelinux.0 from dnsmasq TFTP server.
+#pxe-service=x86PC, "Install Linux", pxelinux
+
+# Loads <tftp-root>/pxelinux.0 from TFTP server at 1.2.3.4.
+# Beware this fails on old PXE ROMS.
+#pxe-service=x86PC, "Install Linux", pxelinux, 1.2.3.4
+
+# Use bootserver on network, found my multicast or broadcast.
+#pxe-service=x86PC, "Install windows from RIS server", 1
+
+# Use bootserver at a known IP address.
+#pxe-service=x86PC, "Install windows from RIS server", 1, 1.2.3.4
+
+# If you have multicast-FTP available,
+# information for that can be passed in a similar way using options 1
+# to 5. See page 19 of
+# http://download.intel.com/design/archives/wfm/downloads/pxespec.pdf
+
+
+# Enable dnsmasq's built-in TFTP server
+#enable-tftp
+
+# Set the root directory for files available via FTP.
+#tftp-root=/var/ftpd
+
+# Do not abort if the tftp-root is unavailable
+#tftp-no-fail
+
+# Make the TFTP server more secure: with this set, only files owned by
+# the user dnsmasq is running as will be send over the net.
+#tftp-secure
+
+# This option stops dnsmasq from negotiating a larger blocksize for TFTP
+# transfers. It will slow things down, but may rescue some broken TFTP
+# clients.
+#tftp-no-blocksize
+
+# Set the boot file name only when the "red" tag is set.
+#dhcp-boot=tag:red,pxelinux.red-net
+
+# An example of dhcp-boot with an external TFTP server: the name and IP
+# address of the server are given after the filename.
+# Can fail with old PXE ROMS. Overridden by --pxe-service.
+#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3
+
+# If there are multiple external tftp servers having a same name
+# (using /etc/hosts) then that name can be specified as the
+# tftp_servername (the third option to dhcp-boot) and in that
+# case dnsmasq resolves this name and returns the resultant IP
+# addresses in round robin fashion. This facility can be used to
+# load balance the tftp load among a set of servers.
+#dhcp-boot=/var/ftpd/pxelinux.0,boothost,tftp_server_name
+
+# Set the limit on DHCP leases, the default is 150
+#dhcp-lease-max=150
+
+# The DHCP server needs somewhere on disk to keep its lease database.
+# This defaults to a sane location, but if you want to change it, use
+# the line below.
+#dhcp-leasefile=/var/lib/misc/dnsmasq.leases
+
+# Set the DHCP server to authoritative mode. In this mode it will barge in
+# and take over the lease for any client which broadcasts on the network,
+# whether it has a record of the lease or not. This avoids long timeouts
+# when a machine wakes up on a new network. DO NOT enable this if there's
+# the slightest chance that you might end up accidentally configuring a DHCP
+# server for your campus/company accidentally. The ISC server uses
+# the same option, and this URL provides more information:
+# http://www.isc.org/files/auth.html
+#dhcp-authoritative
+
+# Set the DHCP server to enable DHCPv4 Rapid Commit Option per RFC 4039.
+# In this mode it will respond to a DHCPDISCOVER message including a Rapid Commit
+# option with a DHCPACK including a Rapid Commit option and fully committed address
+# and configuration information. This must only be enabled if either the server is 
+# the only server for the subnet, or multiple servers are present and they each
+# commit a binding for all clients.
+#dhcp-rapid-commit
+
+# Run an executable when a DHCP lease is created or destroyed.
+# The arguments sent to the script are "add" or "del",
+# then the MAC address, the IP address and finally the hostname
+# if there is one.
+#dhcp-script=/bin/echo
+
+# Set the cachesize here.
+cache-size=1000
+
+# If you want to disable negative caching, uncomment this.
+#no-negcache
+
+# Normally responses which come from /etc/hosts and the DHCP lease
+# file have Time-To-Live set as zero, which conventionally means
+# do not cache further. If you are happy to trade lower load on the
+# server for potentially stale date, you can set a time-to-live (in
+# seconds) here.
+#local-ttl=
+
+# If you want dnsmasq to detect attempts by Verisign to send queries
+# to unregistered .com and .net hosts to its sitefinder service and
+# have dnsmasq instead return the correct NXDOMAIN response, uncomment
+# this line. You can add similar lines to do the same for other
+# registries which have implemented wildcard A records.
+#bogus-nxdomain=64.94.110.11
+
+# If you want to fix up DNS results from upstream servers, use the
+# alias option. This only works for IPv4.
+# This alias makes a result of 1.2.3.4 appear as 5.6.7.8
+#alias=1.2.3.4,5.6.7.8
+# and this maps 1.2.3.x to 5.6.7.x
+#alias=1.2.3.0,5.6.7.0,255.255.255.0
+# and this maps 192.168.0.10->192.168.0.40 to 10.0.0.10->10.0.0.40
+#alias=192.168.0.10-192.168.0.40,10.0.0.0,255.255.255.0
+
+# Change these lines if you want dnsmasq to serve MX records.
+
+# Return an MX record named "maildomain.com" with target
+# servermachine.com and preference 50
+#mx-host=maildomain.com,servermachine.com,50
+
+# Set the default target for MX records created using the localmx option.
+#mx-target=servermachine.com
+
+# Return an MX record pointing to the mx-target for all local
+# machines.
+#localmx
+
+# Return an MX record pointing to itself for all local machines.
+#selfmx
+
+# Change the following lines if you want dnsmasq to serve SRV
+# records.  These are useful if you want to serve ldap requests for
+# Active Directory and other windows-originated DNS requests.
+# See RFC 2782.
+# You may add multiple srv-host lines.
+# The fields are <name>,<target>,<port>,<priority>,<weight>
+# If the domain part if missing from the name (so that is just has the
+# service and protocol sections) then the domain given by the domain=
+# config option is used. (Note that expand-hosts does not need to be
+# set for this to work.)
+
+# A SRV record sending LDAP for the example.com domain to
+# ldapserver.example.com port 389
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389
+
+# A SRV record sending LDAP for the example.com domain to
+# ldapserver.example.com port 389 (using domain=)
+#domain=example.com
+#srv-host=_ldap._tcp,ldapserver.example.com,389
+
+# Two SRV records for LDAP, each with different priorities
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2
+
+# A SRV record indicating that there is no LDAP server for the domain
+# example.com
+#srv-host=_ldap._tcp.example.com
+
+# The following line shows how to make dnsmasq serve an arbitrary PTR
+# record. This is useful for DNS-SD. (Note that the
+# domain-name expansion done for SRV records _does_not
+# occur for PTR records.)
+#ptr-record=_http._tcp.dns-sd-services,"New Employee Page._http._tcp.dns-sd-services"
+
+# Change the following lines to enable dnsmasq to serve TXT records.
+# These are used for things like SPF and zeroconf. (Note that the
+# domain-name expansion done for SRV records _does_not
+# occur for TXT records.)
+
+#Example SPF.
+#txt-record=example.com,"v=spf1 a -all"
+
+#Example zeroconf
+#txt-record=_http._tcp.example.com,name=value,paper=A4
+
+# Provide an alias for a "local" DNS name. Note that this _only_ works
+# for targets which are names from DHCP or /etc/hosts. Give host
+# "bert" another name, bertrand
+#cname=bertrand,bert
+
+# For debugging purposes, log each DNS query as it passes through
+# dnsmasq.
+#log-queries
+
+# Log lots of extra information about DHCP transactions.
+#log-dhcp
+
+# Include another lot of configuration options.
+#conf-file=/etc/dnsmasq.more.conf
+#conf-dir=/etc/dnsmasq.d
+
+# Include all the files in a directory except those ending in .bak
+#conf-dir=/etc/dnsmasq.d,.bak
+
+# Include all files in a directory which end in .conf
+#conf-dir=/etc/dnsmasq.d/,*.conf
+
+# If a DHCP client claims that its name is "wpad", ignore that.
+# This fixes a security hole. see CERT Vulnerability VU#598349
+#dhcp-name-match=set:wpad-ignore,wpad
+#dhcp-ignore-names=tag:wpad-ignore

docker-compose-home.yml

@@ -0,0 +1,19 @@
+services:
+  syncthing-home:
+    image: syncthing/syncthing
+    environment:
+      - PUID=1000
+      - PGID=1000
+      - TZ=Europe/London
+    volumes:
+      - ${STORAGE_DIR}/syncthing:/var/syncthing
+    restart: unless-stopped
+    env_file:
+      - environment-variables/local.env
+    ports:
+      - 127.0.0.1:8384:8384
+    healthcheck:
+      test: curl -fkLsS -m 2 127.0.0.1:8384/rest/noauth/health | grep -o --color=never OK || exit 1
+      interval: 1m
+      timeout: 10s
+      retries: 3  

docker-compose.yml

@@ -1,4 +1,13 @@
 services:
+  mosquitto:
+    restart: unless-stopped
+    image: eclipse-mosquitto
+    ports:
+      - 1883:1883
+    volumes:
+      - ${REPO_DIR}/home-server/mosquitto/config:/mosquitto/config:rw
+      - ${STORAGE_DIR}/mosquitto/data:/mosquitto/data:rw
+      - ${STORAGE_DIR}/mosquitto/log:/mosquitto/log:rw
   traefik:
     restart: unless-stopped
     image: traefik:v3.2
@@ -6,8 +15,8 @@ services:
       - traefik.http.routers.dashboard.rule=Host(`traefik.pladijs`)
       - traefik.http.services.dashboard.loadbalancer.server.port=8080
     volumes:
-      - ${REPO_DIR}/configurations/traefik/traefik.yml:/etc/traefik/traefik.yml
-      - ${STORAGE_DIR}/certificates:/var/lib/certificates
+      - ${REPO_DIR}/configurations/traefik/traefik.yml:/etc/traefik/traefik.yml:ro
+      - ${STORAGE_DIR}/traefik/certificates:/var/lib/certificates
       - /var/run/docker.sock:/var/run/docker.sock
     ports:
       - 80:80
@@ -31,20 +40,20 @@ services:
     volumes:
       - ${STORAGE_DIR}/mariadb:/var/lib/mysql
   homeassistant:
-    image: "ghcr.io/home-assistant/home-assistant:stable"
+    build:
+      context: .
+      dockerfile: ./dockerfiles/home-assistant.Dockerfile
     labels:
       - traefik.http.routers.homeassistant.rule=Host(`homeassistant.pladijs`)
       - traefik.http.services.homeassistant.loadbalancer.server.port=8123
     volumes:
       - ${STORAGE_DIR}/homeassistant:/config
-      - ${REPO_DIR}/configurations/home-assistant/configuration-production.yaml:/config/configuration.yaml
     restart: unless-stopped
     env_file:
       - environment-variables/local.env
       - environment-variables/production.env
   syncthing:
-    image: lscr.io/linuxserver/syncthing:latest
-    container_name: syncthing
+    image: syncthing/syncthing
     labels:
       - traefik.http.routers.syncthing.rule=Host(`syncthing.pladijs`)
       - traefik.http.services.syncthing.loadbalancer.server.port=8384
@@ -53,12 +62,7 @@ services:
       - PGID=1000
       - TZ=Europe/London
     volumes:
-      - ${STORAGE_DIR}/syncthing:/data1
-    ports:
-      - 22000:22000/tcp
-      - 22000:22000/udp
-      - 21027:21027/udp
-    restart: unless-stopped
+      - ${STORAGE_DIR}/syncthing:/var/syncthing
   node-exporter:
     image: prom/node-exporter:latest
     container_name: node-exporter
@@ -83,8 +87,8 @@ services:
       - traefik.http.routers.prometheus.rule=Host(`prometheus.pladijs`)
       - traefik.http.services.prometheus.loadbalancer.server.port=9090
     volumes:
-      - ${REPO_DIR}/configurations/prometheus/prometheus.yml:/etc/prometheus/prometheus.yml
-      - ${STORAGE_DIR}/prometheus:/prometheus
+      - ${REPO_DIR}/configurations/prometheus/prometheus.yml:/etc/prometheus/prometheus.yml:ro
+      - ${STORAGE_DIR}/prometheus:/prometheus:rw
     command:
       - '--config.file=/etc/prometheus/prometheus.yml'
       - '--storage.tsdb.path=/prometheus'

dockerfiles/home-assistant.Dockerfile

@@ -0,0 +1,3 @@
+FROM ghcr.io/home-assistant/home-assistant:stable
+
+COPY ./configurations/home-assistant/configuration-production.yaml /config/configuration.yaml

home-server/readme.md

@@ -1,46 +0,0 @@
-# Server setup
-
-## Installation docker
-
-- See [Official Website](https://docs.docker.com/engine/install/ubuntu/)
-
-## Installation docker compose
-
-- See [This Website](https://nextgentips.com/2022/05/06/how-to-install-docker-compose-v2-on-ubuntu-22-04/)
-
-## Setup VPN client
-
-Follow [this tutorial](https://docs.pivpn.io/wireguard/)
-
-NOTE: on ubuntu, you need to add a symbolic link in order to enable the VPN ([source](https://superuser.com/a/1544697))
-
-```bash
-ln -s /usr/bin/resolvectl /usr/local/bin/resolvconf
-```
-
-## Start docker-compose
-
-TODO add .sh script to start in production
-
-## Tips
-
-When database credentials are not updated after docker restart, consider using
-
-```bash
-docker compose rm db
-```
-
-
-## To Do
-
-- Start the VPN client automatically after reboot
-
-## Generate self signed certificates
-
-https://stackoverflow.com/questions/10175812/how-to-generate-a-self-signed-ssl-certificate-using-openssl
-
-> non-interactive and 10 years expiration
-
-```bash
-openssl req -x509 -newkey rsa:4096 -keyout key.pem -out cert.pem -sha256 -days 3650 -nodes -subj "/C=homeassistant/ST=Belgium/L=Deerlijk/O=Willem/OU=Willem/CN=willem" -subj '/CN=homeassistant.com'
-```

justfile

@@ -0,0 +1,16 @@
+copy-systemd-services:
+	sudo cp ./systemd/recurring-tasks/*.service /etc/systemd/system && \
+	sudo cp ./systemd/recurring-tasks/*.timer /etc/systemd/system && \
+	sudo systemctl daemon-reload
+
+backup-all:
+	find ./systemd/recurring-tasks -type f -name "*.service" -exec bash -c 'sudo systemctl restart "$(basename "$1")"' _ {} \;
+
+status-services:
+	find ./systemd/recurring-tasks -type f -name "*.service" -exec bash -c 'journalctl -u "$(basename "$1")" >> status-services.txt' _ {} \;
+
+status-timers:
+	find ./systemd/recurring-tasks -type f -name "*.timer" -exec bash -c 'sudo systemctl status "$(basename "$1")" >> status-timers.txt' _ {} \;
+
+timers command:
+	find ./systemd/recurring-tasks -type f -name "*.timer" -exec bash -c 'sudo systemctl {{command}} "$(basename "$1")"' _ {} \;

mosquitto/config/mosquitto.conf

@@ -0,0 +1,8 @@
+allow_anonymous false
+listener 1883
+listener 9001
+protocol websockets
+persistence true
+password_file /mosquitto/config/pwfile
+persistence_file mosquitto.db
+persistence_location /mosquitto/data/

mosquitto/config/pwfile

@@ -0,0 +1 @@
+admin:$7$101$kEph6X+U4i2qdSC5$Osz6gdmEmkLtO4ek0eGRBWzJpuaA6CcLImyPaGs13TWkKopFNUWCtHUDzyZ1U55yhFzIADhe0ppncJCFMlg5lQ==

readme.md

@@ -1,5 +1,46 @@
-# Home Automation project
+# Server setup
 
-This repo describes my setup for Home Assistant.
+## Installation docker
 
-Signing
+- See [Official Website](https://docs.docker.com/engine/install/ubuntu/)
+
+## Installation docker compose
+
+- See [This Website](https://nextgentips.com/2022/05/06/how-to-install-docker-compose-v2-on-ubuntu-22-04/)
+
+## Setup VPN client
+
+Follow [this tutorial](https://docs.pivpn.io/wireguard/)
+
+NOTE: on ubuntu, you need to add a symbolic link in order to enable the VPN ([source](https://superuser.com/a/1544697))
+
+```bash
+ln -s /usr/bin/resolvectl /usr/local/bin/resolvconf
+```
+
+## Start docker-compose
+
+TODO add .sh script to start in production
+
+## Tips
+
+When database credentials are not updated after docker restart, consider using
+
+```bash
+docker compose rm db
+```
+
+
+## To Do
+
+- Start the VPN client automatically after reboot
+
+## Generate self signed certificates
+
+https://stackoverflow.com/questions/10175812/how-to-generate-a-self-signed-ssl-certificate-using-openssl
+
+> non-interactive and 10 years expiration
+
+```bash
+openssl req -x509 -newkey rsa:4096 -keyout key.pem -out cert.pem -sha256 -days 3650 -nodes -subj "/C=homeassistant/ST=Belgium/L=Deerlijk/O=Willem/OU=Willem/CN=willem" -subj '/CN=homeassistant.com'
+```

systemd/recurring-tasks/grafana-cold-backup.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=Backup Syncthing - Cold
+After=network.target
+
+[Service]
+ExecStart=homeassistant-backup --mode cold --sourceFolder /mnt/usb/grafana/hot --targetFolder /mnt/usb/grafana/cold --backupName grafana
+WorkingDirectory=/etc/grafana
+Restart=off
+User=willem
+Environment=PATH=/usr/bin:/usr/local/bin
+Environment=NODE_ENV=production
+
+[Install]
+WantedBy=multi-user.target

systemd/recurring-tasks/grafana-cold-backup.timer

@@ -0,0 +1,11 @@
+[Unit]
+Description=Run grafana cold backup Service every day
+                                                    
+[Timer]
+OnBootSec=1min
+OnUnitActiveSec=1day
+Persistent=true
+                                                    
+[Install]
+WantedBy=timers.target
+

systemd/recurring-tasks/grafana-hot-backup.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=Backup Syncthing - Hot
+After=network.target
+
+[Service]
+ExecStart=homeassistant-backup --mode hot --sourceFolder /etc/grafana --targetFolder /mnt/usb/grafana/hot --backupName grafana
+WorkingDirectory=/etc/grafana
+Restart=off
+User=willem
+Environment=PATH=/usr/bin:/usr/local/bin
+Environment=NODE_ENV=production
+
+[Install]
+WantedBy=multi-user.target

systemd/recurring-tasks/grafana-hot-backup.timer

@@ -0,0 +1,11 @@
+[Unit]
+Description=Run Grafana hot backup Service every hour
+                                                    
+[Timer]
+OnBootSec=1min
+OnUnitActiveSec=1hour
+Persistent=true
+                                                    
+[Install]
+WantedBy=timers.target
+

systemd/recurring-tasks/homeassistant-backup/.gitignore

@@ -0,0 +1,34 @@
+# dependencies (bun install)
+node_modules
+
+# output
+out
+dist
+*.tgz
+
+# code coverage
+coverage
+*.lcov
+
+# logs
+logs
+_.log
+report.[0-9]_.[0-9]_.[0-9]_.[0-9]_.json
+
+# dotenv environment variable files
+.env
+.env.development.local
+.env.test.local
+.env.production.local
+.env.local
+
+# caches
+.eslintcache
+.cache
+*.tsbuildinfo
+
+# IntelliJ based IDEs
+.idea
+
+# Finder (MacOS) folder config
+.DS_Store

systemd/recurring-tasks/homeassistant-backup/README.md

@@ -0,0 +1,15 @@
+# homeassistant-backup
+
+To install dependencies:
+
+```bash
+bun install
+```
+
+To run:
+
+```bash
+bun run index.ts
+```
+
+This project was created using `bun init` in bun v1.2.15. [Bun](https://bun.sh) is a fast all-in-one JavaScript runtime.

systemd/recurring-tasks/homeassistant-backup/bun.lock

@@ -0,0 +1,57 @@
+{
+  "lockfileVersion": 1,
+  "workspaces": {
+    "": {
+      "name": "homeassistant-backup",
+      "dependencies": {
+        "moment": "^2.30.1",
+        "pino": "^9.7.0",
+      },
+      "devDependencies": {
+        "@types/bun": "latest",
+      },
+      "peerDependencies": {
+        "typescript": "^5",
+      },
+    },
+  },
+  "packages": {
+    "@types/bun": ["@types/bun@1.2.15", "", { "dependencies": { "bun-types": "1.2.15" } }, "sha512-U1ljPdBEphF0nw1MIk0hI7kPg7dFdPyM7EenHsp6W5loNHl7zqy6JQf/RKCgnUn2KDzUpkBwHPnEJEjII594bA=="],
+
+    "@types/node": ["@types/node@22.15.30", "", { "dependencies": { "undici-types": "~6.21.0" } }, "sha512-6Q7lr06bEHdlfplU6YRbgG1SFBdlsfNC4/lX+SkhiTs0cpJkOElmWls8PxDFv4yY/xKb8Y6SO0OmSX4wgqTZbA=="],
+
+    "atomic-sleep": ["atomic-sleep@1.0.0", "", {}, "sha512-kNOjDqAh7px0XWNI+4QbzoiR/nTkHAWNud2uvnJquD1/x5a7EQZMJT0AczqK0Qn67oY/TTQ1LbUKajZpp3I9tQ=="],
+
+    "bun-types": ["bun-types@1.2.15", "", { "dependencies": { "@types/node": "*" } }, "sha512-NarRIaS+iOaQU1JPfyKhZm4AsUOrwUOqRNHY0XxI8GI8jYxiLXLcdjYMG9UKS+fwWasc1uw1htV9AX24dD+p4w=="],
+
+    "fast-redact": ["fast-redact@3.5.0", "", {}, "sha512-dwsoQlS7h9hMeYUq1W++23NDcBLV4KqONnITDV9DjfS3q1SgDGVrBdvvTLUotWtPSD7asWDV9/CmsZPy8Hf70A=="],
+
+    "moment": ["moment@2.30.1", "", {}, "sha512-uEmtNhbDOrWPFS+hdjFCBfy9f2YoyzRpwcl+DqpC6taX21FzsTLQVbMV/W7PzNSX6x/bhC1zA3c2UQ5NzH6how=="],
+
+    "on-exit-leak-free": ["on-exit-leak-free@2.1.2", "", {}, "sha512-0eJJY6hXLGf1udHwfNftBqH+g73EU4B504nZeKpz1sYRKafAghwxEJunB2O7rDZkL4PGfsMVnTXZ2EjibbqcsA=="],
+
+    "pino": ["pino@9.7.0", "", { "dependencies": { "atomic-sleep": "^1.0.0", "fast-redact": "^3.1.1", "on-exit-leak-free": "^2.1.0", "pino-abstract-transport": "^2.0.0", "pino-std-serializers": "^7.0.0", "process-warning": "^5.0.0", "quick-format-unescaped": "^4.0.3", "real-require": "^0.2.0", "safe-stable-stringify": "^2.3.1", "sonic-boom": "^4.0.1", "thread-stream": "^3.0.0" }, "bin": { "pino": "bin.js" } }, "sha512-vnMCM6xZTb1WDmLvtG2lE/2p+t9hDEIvTWJsu6FejkE62vB7gDhvzrpFR4Cw2to+9JNQxVnkAKVPA1KPB98vWg=="],
+
+    "pino-abstract-transport": ["pino-abstract-transport@2.0.0", "", { "dependencies": { "split2": "^4.0.0" } }, "sha512-F63x5tizV6WCh4R6RHyi2Ml+M70DNRXt/+HANowMflpgGFMAym/VKm6G7ZOQRjqN7XbGxK1Lg9t6ZrtzOaivMw=="],
+
+    "pino-std-serializers": ["pino-std-serializers@7.0.0", "", {}, "sha512-e906FRY0+tV27iq4juKzSYPbUj2do2X2JX4EzSca1631EB2QJQUqGbDuERal7LCtOpxl6x3+nvo9NPZcmjkiFA=="],
+
+    "process-warning": ["process-warning@5.0.0", "", {}, "sha512-a39t9ApHNx2L4+HBnQKqxxHNs1r7KF+Intd8Q/g1bUh6q0WIp9voPXJ/x0j+ZL45KF1pJd9+q2jLIRMfvEshkA=="],
+
+    "quick-format-unescaped": ["quick-format-unescaped@4.0.4", "", {}, "sha512-tYC1Q1hgyRuHgloV/YXs2w15unPVh8qfu/qCTfhTYamaw7fyhumKa2yGpdSo87vY32rIclj+4fWYQXUMs9EHvg=="],
+
+    "real-require": ["real-require@0.2.0", "", {}, "sha512-57frrGM/OCTLqLOAh0mhVA9VBMHd+9U7Zb2THMGdBUoZVOtGbJzjxsYGDJ3A9AYYCP4hn6y1TVbaOfzWtm5GFg=="],
+
+    "safe-stable-stringify": ["safe-stable-stringify@2.5.0", "", {}, "sha512-b3rppTKm9T+PsVCBEOUR46GWI7fdOs00VKZ1+9c1EWDaDMvjQc6tUwuFyIprgGgTcWoVHSKrU8H31ZHA2e0RHA=="],
+
+    "sonic-boom": ["sonic-boom@4.2.0", "", { "dependencies": { "atomic-sleep": "^1.0.0" } }, "sha512-INb7TM37/mAcsGmc9hyyI6+QR3rR1zVRu36B0NeGXKnOOLiZOfER5SA+N7X7k3yUYRzLWafduTDvJAfDswwEww=="],
+
+    "split2": ["split2@4.2.0", "", {}, "sha512-UcjcJOWknrNkF6PLX83qcHM6KHgVKNkV62Y8a5uYDVv9ydGQVwAHMKqHdJje1VTWpljG0WYpCDhrCdAOYH4TWg=="],
+
+    "thread-stream": ["thread-stream@3.1.0", "", { "dependencies": { "real-require": "^0.2.0" } }, "sha512-OqyPZ9u96VohAyMfJykzmivOrY2wfMSf3C5TtFJVgN+Hm6aj+voFhlK+kZEIv2FBh1X6Xp3DlnCOfEQ3B2J86A=="],
+
+    "typescript": ["typescript@5.8.3", "", { "bin": { "tsc": "bin/tsc", "tsserver": "bin/tsserver" } }, "sha512-p1diW6TqL9L07nNxvRMM7hMMw4c5XOo/1ibL4aAIGmSAt9slTE1Xgw5KWuof2uTOvCg9BY7ZRi+GaF+7sfgPeQ=="],
+
+    "undici-types": ["undici-types@6.21.0", "", {}, "sha512-iwDZqg0QAGrg9Rav5H4n0M64c3mkR59cJ6wQp+7C4nI0gsmExaedaYLNO44eT4AtBBwjbTiGPMlt2Md0T9H9JQ=="],
+  }
+}

systemd/recurring-tasks/homeassistant-backup/index.ts

@@ -0,0 +1,89 @@
+import { $ } from "bun";
+import moment from "moment";
+import logger from "pino";
+import { parseArgs } from "util";
+
+const { values } = parseArgs({
+  args: Bun.argv,
+  options: {
+    mode: {
+      type: "string",
+      required: true,
+    },
+    sourceFolder: {
+      type: "string",
+      required: true,
+    },
+    targetFolder: {
+      type: "string",
+      required: true,
+    },
+    backupName: {
+      type: "string",
+      required: true,
+    },
+  },
+  strict: true,
+  allowPositionals: true,
+});
+const log = logger();
+
+switch (values.mode) {
+  case "hot":
+    await hotCopy(
+      values.sourceFolder!,
+      values.targetFolder!,
+      values.backupName!,
+    );
+    break;
+  case "cold":
+    await coldCopy(
+      values.sourceFolder!,
+      values.targetFolder!,
+      values.backupName!,
+    );
+    break;
+}
+
+// 3 cold copies are stored
+async function hotCopy(
+  sourceFolder: string,
+  targetFolder: string,
+  backupName: string,
+) {
+  const timestamp = moment().format("YYYY-MM-DD_HH-mm-ss"); // Return today's date time
+
+  // Make sure user has access to all folders
+  await $`sudo chown -R willem:willem /etc/homeassistant`;
+
+  log.info("Creating new copy");
+  await $`mkdir -p ${targetFolder}`;
+  // Sync new copy
+  await $`rsync -a ${sourceFolder} ${targetFolder}/backup_${backupName}_${timestamp}`;
+
+  log.info("Only keep last 3 copies");
+  // Only keep last 3 copies
+  await $`cd ${targetFolder} && ls | grep ${backupName} | sort -r | tail -n +4 | xargs rm -rf`;
+}
+
+// Only 1 cold copy is retained
+async function coldCopy(
+  sourceFolder: string,
+  targetFolder: string,
+  backupName: string,
+) {
+  const timestamp = moment().format("YYYY-MM-DD_HH-mm-ss"); // Return today's date time
+
+  log.info("Creating new copy");
+
+  // find latest backup
+  const sourceFolderToBackup =
+    await $`cd ${sourceFolder} && ls | grep ${backupName} | sort | tail -n 1`.text().then(resp => resp.replace('\n',''));
+  log.info(`Folder to back up: ${sourceFolderToBackup}`);
+  await $`mkdir -p ${targetFolder}`;
+  await $`zip -r ${targetFolder}/${backupName}_${timestamp}.zip ${sourceFolder}/${sourceFolderToBackup}`;
+
+  log.info("Only keep last copy");
+  // Only keep last copy
+  await $`cd ${targetFolder} && ls | grep ${backupName} | sort -r | tail -n +2 | xargs rm -rf`;
+}

systemd/recurring-tasks/homeassistant-backup/package.json

@@ -0,0 +1,16 @@
+{
+  "name": "homeassistant-backup",
+  "module": "index.ts",
+  "type": "module",
+  "private": true,
+  "devDependencies": {
+    "@types/bun": "latest"
+  },
+  "peerDependencies": {
+    "typescript": "^5"
+  },
+  "dependencies": {
+    "moment": "^2.30.1",
+    "pino": "^9.7.0"
+  }
+}

systemd/recurring-tasks/homeassistant-backup/tsconfig.json

@@ -0,0 +1,29 @@
+{
+  "compilerOptions": {
+    // Environment setup & latest features
+    "lib": ["ESNext"],
+    "target": "ESNext",
+    "module": "Preserve",
+    "moduleDetection": "force",
+    "jsx": "react-jsx",
+    "allowJs": true,
+
+    // Bundler mode
+    "moduleResolution": "bundler",
+    "allowImportingTsExtensions": true,
+    "verbatimModuleSyntax": true,
+    "noEmit": true,
+
+    // Best practices
+    "strict": true,
+    "skipLibCheck": true,
+    "noFallthroughCasesInSwitch": true,
+    "noUncheckedIndexedAccess": true,
+    "noImplicitOverride": true,
+
+    // Some stricter flags (disabled by default)
+    "noUnusedLocals": false,
+    "noUnusedParameters": false,
+    "noPropertyAccessFromIndexSignature": false
+  }
+}

systemd/recurring-tasks/homeassistant-cold-backup.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=Backup Home Assistant - Cold
+After=network.target
+
+[Service]
+ExecStart=homeassistant-backup --mode cold --sourceFolder /mnt/usb/homeassistant/hot --targetFolder /mnt/usb/homeassistant/cold --backupName homeassistant
+WorkingDirectory=/etc/homeassistant
+Restart=off
+User=willem
+Environment=PATH=/usr/bin:/usr/local/bin
+Environment=NODE_ENV=production
+
+[Install]
+WantedBy=multi-user.target

systemd/recurring-tasks/homeassistant-cold-backup.timer

@@ -0,0 +1,11 @@
+[Unit]
+Description=Run Home assistant cold backup Service every day
+                                                    
+[Timer]
+OnBootSec=1min
+OnUnitActiveSec=1day
+Persistent=true
+                                                    
+[Install]
+WantedBy=timers.target
+

systemd/recurring-tasks/homeassistant-hot-backup.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=Backup Home Assistant - Hot
+After=network.target
+
+[Service]
+ExecStart=homeassistant-backup --mode hot --sourceFolder /etc/homeassistant --targetFolder /mnt/usb/homeassistant/hot --backupName homeassistant
+WorkingDirectory=/etc/homeassistant
+Restart=off
+User=willem
+Environment=PATH=/usr/bin:/usr/local/bin
+Environment=NODE_ENV=production
+
+[Install]
+WantedBy=multi-user.target

systemd/recurring-tasks/homeassistant-hot-backup.timer

@@ -0,0 +1,11 @@
+[Unit]
+Description=Run Home assistant hot backup Service every hour
+                                                    
+[Timer]
+OnBootSec=1min
+OnUnitActiveSec=1hour
+Persistent=true
+                                                    
+[Install]
+WantedBy=timers.target
+

systemd/recurring-tasks/pull-zettelkasten.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=Pull zettelkasten
+After=network.target
+
+[Service]
+ExecStart=git pull
+WorkingDirectory=/home/willem/repos/zettelkasten
+Restart=no
+User=willem
+Environment=PATH=/usr/bin:/usr/local/bin
+Environment=NODE_ENV=production
+
+[Install]
+WantedBy=multi-user.target

systemd/recurring-tasks/pull-zettelkasten.timer

@@ -0,0 +1,11 @@
+[Unit]
+Description=Pull zettelkasten every hour
+                                                    
+[Timer]
+OnBootSec=1min
+OnUnitActiveSec=1min
+Persistent=true
+                                                    
+[Install]
+WantedBy=timers.target
+

systemd/recurring-tasks/send-todo-mail.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=Send todo mail
+After=network.target
+
+[Service]
+ExecStart=sh -c "rg '\- \[ \]' . | mail -s todos willemserruys@proton.me"
+WorkingDirectory=/home/willem/repos/zettelkasten
+Restart=no
+User=willem
+Environment=PATH=/usr/bin:/usr/local/bin
+Environment=NODE_ENV=production
+
+[Install]
+WantedBy=multi-user.target

systemd/recurring-tasks/send-todo-mail.timer

@@ -0,0 +1,11 @@
+[Unit]
+Description=Send ToDo mail
+                                                    
+[Timer]
+OnBootSec=1min
+OnUnitActiveSec=1day
+Persistent=true
+                                                    
+[Install]
+WantedBy=timers.target
+

systemd/recurring-tasks/syncthing-cold-backup.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=Backup Syncthing - Cold
+After=network.target
+
+[Service]
+ExecStart=homeassistant-backup --mode cold --sourceFolder /mnt/usb/syncthing/hot --targetFolder /mnt/usb/syncthing/cold --backupName syncthing
+WorkingDirectory=/etc/syncthing
+Restart=off
+User=willem
+Environment=PATH=/usr/bin:/usr/local/bin
+Environment=NODE_ENV=production
+
+[Install]
+WantedBy=multi-user.target

systemd/recurring-tasks/syncthing-cold-backup.timer

@@ -0,0 +1,11 @@
+[Unit]
+Description=Run Syncthing cold backup Service every day
+                                                    
+[Timer]
+OnBootSec=1min
+OnUnitActiveSec=1day
+Persistent=true
+                                                    
+[Install]
+WantedBy=timers.target
+

systemd/recurring-tasks/syncthing-hot-backup.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=Backup Syncthing - Hot
+After=network.target
+
+[Service]
+ExecStart=homeassistant-backup --mode hot --sourceFolder /etc/syncthing --targetFolder /mnt/usb/syncthing/hot --backupName syncthing
+WorkingDirectory=/etc/syncthing
+Restart=off
+User=willem
+Environment=PATH=/usr/bin:/usr/local/bin
+Environment=NODE_ENV=production
+
+[Install]
+WantedBy=multi-user.target

systemd/recurring-tasks/syncthing-hot-backup.timer

@@ -0,0 +1,11 @@
+[Unit]
+Description=Run Syncthing hot backup Service every hour
+                                                    
+[Timer]
+OnBootSec=1min
+OnUnitActiveSec=1hour
+Persistent=true
+                                                    
+[Install]
+WantedBy=timers.target
+

vpn/openvpn/server.conf

@@ -0,0 +1,39 @@
+dev tun
+proto udp
+port 1194
+ca /etc/openvpn/easy-rsa/pki/ca.crt
+cert /etc/openvpn/easy-rsa/pki/issued/rpi-main_9c719429-6726-4df0-b9a6-a6054de4df85.crt
+key /etc/openvpn/easy-rsa/pki/private/rpi-main_9c719429-6726-4df0-b9a6-a6054de4df85.key
+dh none
+ecdh-curve prime256v1
+topology subnet
+server 10.11.175.0 255.255.255.0
+# Set your primary domain name server address for clients
+push "dhcp-option DNS 192.168.1.81"
+# Prevent DNS leaks on Windows
+push "block-outside-dns"
+# Override the Client default gateway by using 0.0.0.0/1 and
+# 128.0.0.0/1 rather than 0.0.0.0/0. This has the benefit of
+# overriding but not wiping out the original default gateway.
+push "redirect-gateway def1"
+client-to-client
+client-config-dir /etc/openvpn/ccd
+keepalive 15 120
+remote-cert-tls client
+tls-version-min 1.2
+ tls-crypt /etc/openvpn/easy-rsa/pki/ta.key
+cipher AES-256-CBC
+auth SHA256
+user openvpn
+group openvpn
+persist-key
+persist-tun
+crl-verify /etc/openvpn/crl.pem
+status /var/log/openvpn-status.log 20
+status-version 3
+syslog
+verb 3
+#DuplicateCNs allow access control on a less-granular, per user basis.
+#Remove # if you will manage access by user instead of device. 
+#duplicate-cn
+# Generated for use by PiVPN.io